Peerless DS-VW760 Dokumentacja Pobierz pdf (Strona 6)

Installation to Wall Stud

Useastudndertolocatetheedgesofthestud.Useofanedge-to-edgestudnderishighlyrecommended.

Based on their edges, draw a vertical line down the stud center. Place video wall mount assembly on wall as a

template. Level plate, and mark the center of the four mounting holes. Make sure that the mounting holes are on

thestudcenterline.Drillfour5/32"(4mm)dia.holes2-1/2"(65mm)deep.Makesurethatthevideowallmount

assemblyislevel,secureitusingfour#14x2.5"woodscrews(E)andfenderwashers(G)asshownbelow.

• Installermustverifythatthesupportingsurfacewillsafelysupportthecombinedloadoftheequipmentandall

attached hardware and components.

• Tightenwoodscrewssothatwallplateisrmlyattached,butdonotovertighten.Overtighteningcandamagethe

screws, greatly reducing their holding power.

• Nevertighteninexcessof80in.•lb(9N.M.).

• Makesurethatmountingscrewsareanchoredintothecenterofthestud.Theuseofan"edgetoedge"studnder

is highly recommended.

• Hardwareprovidedisforattachmentofmountthroughstandardthicknessdrywallorplasterintowoodstuds.Install-

ers are responsible to provide hardware for other types of mounting situations.

WARNING

VIDEOWALL

MOUNTASSEMBLY

ISSUED: 04-23-10 SHEET #: 145-9010-2 04-27-10

6 of 14

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Brak uwag

Peerless DS-VW760 Dokumentacja Strona 6