Peerless PLAV70-UNL-S Dokumentacja Pobierz pdf (Strona 13)

13 of 14

ISSUED: 06-05-06 SHEET #: 202-9142-7 06-27-11

Position of screen may be adjusted vertically up to .79" in each direction by doing the following:

• To raise screen, turn hex nut shown in ﬁ gure 10.1 clockwise with 3/4" open-end wrench (not provided).

• To lower screen, turn hex nut shown in ﬁ gure 10.1 counterclockwise with 3/4" open-end wrench (not provided).

If it is too difﬁ cult to adjust roll of plasma, loosen

screws shown in ﬁ gure 9.1 using a phillips

screwdriver.

IMPORTANT! Do not loosen or tighten screws

more than 1/8 turn.

Depending on the speciﬁ c size & weight of the plas-

ma, articulating swing arm may be angled at different

positions, causing plasma to appear to lean sideways

at different articulating positions. Tilt-roll assembly (B)

allows plasma to be manually adjusted, so plasma

can be horizontal at all positions. To adjust, gently

rotate plasma by hand to desired position.

9-1

ARTICULATING

ARM

PLASMA

ﬁ g 9.1

HEX

NUT

ﬁ g 10.1

All other brand and product names are trademarks or registered trademarks of their respective owners.

ROLL

ADJUSTMENT

SCREWS

1 2 ... 8 9 10 11 12 13 14

Brak uwag

Peerless PLAV70-UNL-S Dokumentacja Strona 13