Peerless PLA60-UNLP Instrukcja Obsługi Pobierz pdf (Strona 11)

11 of 41

ISSUED: 06-05-06 SHEET #: 202-9141-10 06-14-12

Begin with the shortest length screw, hand thread through multi-washer and adapter bracket into display as

shown below. Screw must make at least three full turns into the mounting hole and ¿ t snug into place. Do not

over tighten. If screw cannot make three full turns into the display, select a longer length screw from the bafÀ ed

fastener pack. Repeat for remaining mounting holes, level brackets and tighten screws.

NOTE: Spacers may not be used, depending upon the type of display.

Begin with longer length screw, hand thread through multi-washer, adapter bracket and spacer in that order into

display as shown below. Screw must make at least three full turns into the mounting hole and ¿ t snug into place.

Do not over tighten. If screw cannot make three full turns into the display, select a longer length screw from the

bafÀ ed fastener pack. Repeat for remaining mounting holes, level brackets and tighten screws.

For Flat Back Display

For Bump-out or Recessed Back Display

7-1

7-2

If you have any questions, please call Peerless customer care at 1-800-865-2112.

DISPLAY

MULTI-WASHER

SCREW

ADAPTER

BRACKET

(BB)

ﬁ g. 7.2

SPACER

ﬁ g. 7.1

ADAPTER

BRACKET

(BB)

DISPLAY

MULTI-WASHER

SCREW

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 40 41

Brak uwag

Peerless PLA60-UNLP Instrukcja Obsługi Strona 11